Stainless steel body,
Cast copper hot plate can save energy,
Newly design
CE certificate
Name: Counter-top electric griddle
Type : ET-PL-600
Size : 600 x 600 x 340mm
Volt : 220/380V
Power : 5.6kW
Stainless steel body,
Cast-copper hot plate can save energy,
The latest design
CE certificate
Counter-top electric griddle - Flat
Type |
ET-PL-600 |
| Size |
600 x 600 x 340mm |
| Volt |
220V |
| Power |
5.6kW |
Installation Requirements:
1, the installation: the machine away from the wall must be at least 10cm, in case the machine need to be installed against a wall, that wall must be fire-resistant to prevent burning.
2, the installation location should be in a well-ventilated place, and to install an exhaust fan, make sure that during operation, the steam and exhaust gas after combustion.
3, After installation of the machine, be sure to keep a smooth, horizontal not inclined, nor can the use of shaking.
4, the installation due to the gas supplier license application has been the use of such gases, to verify the gas supply is consistent with the future use of gas, can be installed.
5, Do not use this machine does not comply with other gases used as fuel and high pressure regulating valve. (This machine is only suitable for low-pressure regulating valve).
Precautions:
1, Do not flammable items (such as towels, etc.), placed anywhere on the oven surface, it may cause burning fire accident.
2, after use, you should immediately turn off the gas valve.
3, found leak, immediately turn off the gas valve, open windows to enhance ventilation, do not switch the power and electrical system to be repaired before use.
Maintenance:
1, to regularly clean up the dirt and oil grill online basin. (Recommendation: twice daily)
2, if not used for long, first with a cloth coated with gasoline, cleaning stainless steel surfaces, well-ventilated place.
3, cleaning equipment, do not use cleaners containing material wear, brushes or scrapers and other tools to clean the stainless steel surface, because the residual iron can cause rust. And in accordance with the direction of satin cloth, do not use the product to clean steel surface contains chlorine (bleach, hydrochloric acid, etc.), even though these products have been diluted and do not use.
4, the first ten minutes after the warm-up work.
5, this product can not be washed with water directly.
6. Do not use corrosive substances (for example: potassium chloride) under floor cleaning equipment.
7, to regularly clean the furnace burner dirt. (Recommended once a week).
){kind=link}